ISO Metric Gauges
ISO Metric Gauges Are Most Commonly Used Gauges In The Industry.
Specification:
ISO Standard: Basic Dimensions: ISO 965 Part 1, 2, 3 – 1998, Gauging Practice: ISO 1502-1996.
Indian Standard: Basic Dimensions: IS 14962 Part 1, 2, 3 – 2001, Gauging Practice: IS 2334 – 2001.
ANSI Standard: Basic Dimensions: ANSI / ASME B 1.13 M, Gauging Practice: ANSI / ASME B 1.16 1984.
DIN Standard: Basic Dimensions &Amp; Gauging Practice: DIN 13 – 1999.
BS Standard: Basic Dimensions: B.S. 3643 Part I &Amp; II – 2007, Gauging Practice: B.S 919 Part III – 2007.
JIS Standard: Basic Dimensions: JIS B 0209, Gauging Practice: JIS B 0251-2008.
Manufacturing Range:
Diameter 1.6 Mm To 300mm & Pitches Covered Are 0.35mm To 8 Mm.
We Also Offer Special Gauges As Per The Customers Drawings &Amp; Requirements.
Gauge Type |
Diameter Range |
Pitches in mm |
Tolerance Class |
|||
|
|
|
|
|
|
|
Thread Plug Gauges. |
1.6mm – 300 mm |
0.35 to 6mm Pitches above 6mm up to 8mm can be supplied based on customer request. |
6H or any other class as per customer requirement |
|||
Thread Ring Gauges. |
2mm – 260mm |
0.4 to 6mmPitches above 6mm up to 8mm can be supplied based on customer request. |
6gor any other class as per customer requirement |
|||
Check Plug Gauges |
1.6mm – 300mm |
To check NEW Go & No-go Thread Ring Gauges as per above sizes |
||||
Wear Check Plug Gauges |
1.5mm – 300mm |
To check / calibrate USED Go & No-go Thread Ring Gauges as per above sizes |
||||
Check Ring Gauges |
To check NEW Go & No-go Thread Plug Gauges as per above sizes |
|||||
Wear Check Ring Gauges |
To check / calibrate USED Go & No-go Thread Plug Gauges as per above sizes |
|||||
Check Ring Gauges |
To check NEW Go & No-go Thread Plug Gauges as per above sizes |
Recommended Tolerance classes for Internal Threads (Plug Gauges)
Fine |
Tolerance position ‘G’ |
|
|
Tolerance position ‘H’ |
|
|
Medium Coarse |
S |
N |
L |
S |
N |
L |
– |
– |
– |
4H |
5H |
6H |
|
(5G) |
6G |
(7G) |
5H |
6H |
7H |
|
– |
(7G) |
(8G) |
– |
7H |
8H |
Showing 1 to 4 of 4 entries
*S – Short length of Thread engagement
N – Normal length of Thread engagement
L- Long length of Thread engagement
Recommended Tolerance classes for External Threads (Ring Gauges)
Fine Medium Coarse |
Tolerance position ‘e’ |
Tolerance position ‘f’ |
Tolerance position ‘g’ |
Tolerance position ‘h’ |
||||||||
S |
N |
L |
S |
N |
L |
S |
N |
L |
S |
N |
L |
|
– |
– |
– |
– |
– |
– |
(4g) |
(5g4g) |
(3h4h) |
4h |
(5h4h) |
||
– |
6e |
(7e6e) |
– |
6f |
– |
(5g6g) |
6g |
(7g6g) |
(5h6h) |
6h |
(7h6h) |
|
– |
(8e) |
(9e8e) |
– |
– |
– |
– |
8g |
(9g8g) |
– – |